Widex RC3-1 Especificações descarregar pdf (Página 6)

3 . O v e r all gain may be adjusted, in one dB steps for each acoustic listening pro g r am other than the

primary Master Pro g ram and the Audibility Extender, in the [P ROGRAM GAIN OFFS E T ] mode.

Note: [PGO] can only be accessed if additional listening programs have been selected.

a) To access [PROGRAM GAIN OFFSET] press

[PGO] in the [PROGRAM OPTIONS] mode

window (see B).

Note: Audibility Extender is displayed as

[* AE*] in this screen to indicate that the

listening program has been selected but no

change to program offset can be made.

b) Press the [UP ARROW] under the desired listening program to increase the program

gain offset.

Press the [DOWN ARROW] under the desired listening program to decrease the program

gain offset.

c) Press [BACK] (see B) to return to [PRO-

GRAM OPTIONS]. An exclamation point

(!) will appear in the mode window next to

[PGO] to indicate the adjustment of [PRO-

GRAM GAIN OFFSET].

4. The microphone characteristic setting can

be adjusted for each acoustic listening pro-

gram in the [HIGH DEF LOCATOR] mode.

Note: Inteo CIC instruments have only an omnidirectional mode.

a) Press [ = =› ] in the [PROGRAM OPTIONS] mode window (see B).

b) Press [LOC] in the mode window.

c) The current microphone characteristic setting will be displayed for each program.

d) Press the [UP ARROW] or [DOWN ARROW] under the desired listening program to adjust

the microphone setting. The available settings are:

• High Definition Locator with Speech Tracer [LOCS]

• High Definition Directional [DIR]

• High Definition Omnidirectional [OMNI]

• High Definition Locator without Speech Tracer [LOC]

e) Press [BACK] (see B) to return to [PROGRAM OPTIONS]. An exclamation point (!) will

appear in the mode window next to [LOC] to indicate the adjustment of the microphone

characteristic setting.

e) Press [BACK] (see B) to return to [PRO-

GRAM OPTIONS]. An exclamation point (!)

will appear in the mode window next to

[PRG] to indicate the selection of additional

listening programs.

2. Remote Control RC3 matching can be accomplished in the [PROGRAM SELECTION] mode.

a) P ro g r am the RC3 remote control (see

P r o g ramming the RC3 Remote Contro l

instructions).

b) Press [RC3] in the [PROGRAM SELEC-

TION] mode window (see B).

c) [LEFT RC3 MATCHING] or [RIGHT RC3

MATCHING] will be displayed.

d) Press [STRT] in the mode window (see B)

while simultaneously holding down the

center key [ (o) ] on the remote control.

e) MATCH OK appears beneath [LEFT RC3

MATCHING] or [RIGHT RC3 MATCHING].

The remote control model, RC3-1 or RC3-2,

is displayed as is the ID number, the number

of program selections and the setting of the

right/left function when using an RC3-2

remote.

Note: The number of programs in the hearing aid and the number of programs in the

remote control must match. The RC3-1 can hold up to three (3) programs and the RC3-2

can hold up to five (5) programs.

f) When RC3 matching is not successful there are several possible errors:

• No RC3 Data-Hearing aid and RC3 are not communicating i.e. RC3 has not been pro-

grammed, the center key of the RC3 has not been held down during the matching

process, RC3 is out of range (more than 1 meter) or RC3 batteries are dead.

• RC3-1 has a different number of programs than the hearing aid.

• RC3-2 has a different number of programs than the hearing aid.

• ID code is invalid.

g ) P r ess [RS E T] in the mode window to re-set RC3 matching if necessary.

h) Press [BACK] in the mode window to return to [PROGRAM SELECTION].

i) Press [BACK] (see B) in the mode window to return to [PROGRAM OPTIONS]. An excla-

mation point (!) will appear in the mode window next to [RC3].

Note: When programming both a left and a right hearing aid each aid must be matched to

the RC3 individually.

IN_IP5_Manual8.qxd 11/28/06 1:12 PM Page 8

1 2 3 4 5 6 7 8

Comentários a estes Manuais

Sem comentários

Widex RC3-1 Especificações Página 6

Comentários a estes Manuais